Site Map

Site Search

Products
Applications
	Electronics Automotive Housing
Data Sheet
	Surface Protection Double-faced Tape Electrical Insulation Printing Process Aluminum Tape
About Us
Oversea

HOME > i-tape > Data sheet > doc

Surface Protection Tape

Co-extruded/low-adhesion design

Grade	Compo -sition (Base /Adhe -sive)	Stan -dard Thick -ness (um)	Color	Adhesion (N/25mm)	Tensile strength (N/cm)	Tear elong -ation (%)	Haze (%)	Advantages				Applications
Grade	Compo -sition (Base /Adhe -sive)	Stan -dard Thick -ness (um)	Color	Adhesion (N/25mm)	Tensile strength (N/cm)	Tear elong -ation (%)	Haze (%)	Good trans -pare -ncy	Low adhe -sion deve -lop -ment	Good cut -ting	Pro -duc -tion in clean room	Applications
#6221F	Specia l polye -thylene /Polyolefin	50	Transparent	0.02 1)	13.0	230	16		o+			For protection of optical film and sheet flat surfaces
#625T		60	Transparent Blue .Green	0.08 1)	12.0	300	5	o	o
#622E		60	Transparent	0.12 2)	13.0	270	5	o
#6281K		90	Transparent Blue .Green	0.20 2)	22.5	400	21			o
#624L		60	Transparent Blue .Green	0.02 1)	12.0	350	17		o+	o		For protection of surfaces of various resin plates
#624F		50	Transparent Blue .Green	0.03 1)	12.0	400	14		o+	o
#624S		50	Transparent Blue .Green	0.04 1)	13.0	400	16		o+	o
#624C		50	Transparent Blue .Green	0.05 2)	12.5	400	16		o	o
#624A		60	Transparent Blue .Green	0.10 2)	13.5	460	15			o
#622T		60	Transparent Blue .Green	0.08 1)	12.0	300	13		o
#622AX		60	Transparent Blue .Green	0.13 2)	13.0	320	10
#622B		60	Transparent Blue .Green	0.85 2)	13.0	310	15

Note: Adhesion is for polycarbonate plates (Note 1) and PMMA plates (Note 2).

Co-extruded/strong-adhesion design

Grade	Compo -sition (Base /Adhesive)	Stan -dard Thick -ness (um)	Color	Adhe -sion N /25mm)	Tensile strength (N/cm)	Tear elong -ation (%)	Haze (%)	Advantages					Applications
Grade	Compo -sition (Base /Adhesive)	Stan -dard Thick -ness (um)	Color	Adhe -sion N /25mm)	Tensile strength (N/cm)	Tear elong -ation (%)	Haze (%)	Low adhe -sion deve -lop -ment	Good rough sur -face adhe -ssion	Good flex i-bili -ty	Good cut -ting	Pro -duc -tion in clean room	Applications
#6312C	Special polye -thylene /Special synth -etic rubber	60	Transparent Blue .Green	1.2	13.0	220	15	o	o	o			For protection of metallic plate surfaces and rough surfaces (e.g., embossed or matte surfaces)
#6318C		60	Transparent Blue .Green	2.7	13.0	220	15	o	o	o
#6312KT		50	Transparent	0.9	12.0	220	13		o	o
#6312B		60	Transparent Blue .Green	1.7	13.0	230	15		o	o
#6314B		60	Transparent Blue .Green	2.6	13.0	230	15		o	o
#6318B		60	Transparent Blue .Green	3.6	13.0	230	15		o	o
#6322C		60	Transparent	0.2	12.0	400	13	o	o		o
#6322B		60	Transparent Blue .Green	2.4	12.0	350	13		o		o
#6324B		60	Transparent Blue .Green	3.5	12.0	350	13		o		o
#6328B		60	Transparent Blue .Green	4.8	12.0	350	13		o		o
#6388G	Special PP /Special synth -etic rubber	60	Transparent	5.0	13.0	380	11		o+		o
#6364F		40	Blue	4.8	17.0	550	45		o		o
#6364J		60	Blue	8.0	23.5	640	50		o+		o
#6362M2		40	Transparent	1.0	18.0	550	40		o		o	o
#6364MA		40	Transparent	3.2	17.0	550	40		o		o	o
#6364MC		40	Transparent	4.5	17.0	550	40		o		o	o
#6364ME		40	Transparent	5.5	17.0	550	40		o		o	o

Note: Adhesion is for stainless steel plates. o+: Excellent, o: Good
For information on width and length, please contact us.

Adhesion design

Grade	Compo -sition (Base /Adhesive)	Standard Thick -ness (um)	Color	Adhe -sion (N /25mm)	Tensile strength (N/cm)	Tear elong -ation (%)	Advantages .Applications
#623C-1	Special polye -thylene /Acrylic	55	Transparent	0.2	over 0.8	350	- Optimal choice for nameplates - Broad lineup - Stable adhesion and good workability
#623C-1H		55	Transparent	1.2	over 0.8	350
#623C-2		55	Transparent	2.0	over 0.8	350
#623C-2H		55	Transparent	1.9	over 0.8	350
#623C-3		55	Transparent	3.3	over 0.8	350
#623C-3H		55	Transparent	2.3	over 0.8	350
#623E		75	Blue	2.3	over 1.2r	350	Optimal choice for aluminum and stainless steel plates
#623A Transparent		110	Transparent	1.7	over 1.5	350
#623A White		110	White	3.7	over 1.5	350

Note: Adhesion is for stainless steel plates.
For information on width and length, please contact us.

Precautions for selection

1.Since the type selection may vary depending on the type of adherend, application, and using process, please consult our responsible sales engineers.
Before using these products, please conduct sufficient tests by yourself in accordance with the application and the processing conditions.
2.Be sure to conduct verification tests when changing adherend materials, surface conditions, or application and processing conditions.

Co-extruded surface protection tape (image) production process

References

Surface Protection
Double-faced Adhesive Tape
Electrical Insulation Tape
Printing Process Tape
Aluminum Tape

Contact